CONTENTS: base devs idenet scsi sysvinit  
base:     Basic Linux filesystem package.
base:
base:     Sets up the basic directory structure and adds a few important
base:     binaries such as GNU mtools 2.0.7, zip201, and unzip512.
base:
base:
base:
base:
base:
base:
base:
devs:     Device files.
devs:
devs:     This package creates special files in the /dev directory that 
devs:     represent your system's hardware.
devs:
devs:
devs:
devs:
devs:
devs:
devs:
idenet:   Linux kernel version 1.2.1, without SCSI support.
idenet:  
idenet:   A Linux kernel for computers that do not need SCSI support. You MUST
idenet:   install a kernel image in order for your system to boot. This kernel
idenet:   also contains UMSDOS and PPP.  See the file 'idenet.cfg' for an exact
idenet:   list of included drivers.
idenet:
idenet:   ***IMPORTANT***!  If you have special hardware, such as a non-SCSI
idenet:   CD-ROM drive, you'll need to install a kernel from the Q series that
idenet:   supports it, or compile the support into your own custom kernel.
idenet:
scsi:  Linux kernel version 1.2.1, with SCSI + IDE support. 
scsi:
scsi:     This is a Linux kernel with full support for SCSI devices such as hard
scsi:     drives, tape drives, and CD-ROM drives. This kernel also contains
scsi:     UMSDOS and PPP.  See the file 'scsi.cfg' for an exact list of 
scsi:     included drivers.  IMPORTANT***!  If you have special hardware, such as a
scsi:     non-SCSI CD-ROM drive, you'll need to install a kernel from the Q 
scsi:     series that supports it, or compile the support into your own kernel.
scsi:     *NO* network drivers are included to keep the kernel within size
scsi:     limits.  If you need them, use a kernel from 'Q'.
scsi:
sysvinit: SysV style init v. 2.4
sysvinit:
sysvinit: System V style init programs by Miquel van Smoorenburg that control
sysvinit: the booting and shutdown of your system. These support a number of
sysvinit: system runlevels, each with a specific set of utilities spawned. For
sysvinit: example, the normal system runlevel is 5, which starts getty on 
sysvinit: virtual consoles tty1 - tty6. Runlevel 6 starts xdm. Runlevel 0 shuts
sysvinit: the system down. See the documentation in /usr/doc/SysVinit-2.4 and
sysvinit: the scripts in /etc/rc.d for more information.
sysvinit:
sysvinit: